 |
 |
METRIC Miniature Ball Bearings (Seals, Shielded or Open)
STAINLESS/CHROME/CERAMIC
ANGULARCONTACT/RADIAL |
 |
 |
METRIC Flanged Bearings (Seals, Shielded , Open)
STAINLESS/CHROME/CERAMIC
ANGULARCONTACT/RADIAL |
 |
 |
INCH Miniature Ball Bearings
(Flanged & Extended Inner)
STAINLESS/CHROME/CERAMIC
ANGULARCONTACT/RADIAL |
 |
 |
METRIC Angular Contact Bearings
(Series 7000 to 7300)
STAINLESS, CERAMIC or CHROME |
 |
 |
METRIC Deep Groove Radial Ball Bearings (Series 6000, 6200, 6300, 6700, 6800, 6900 and 16000) STAINLESS, CERAMIC or CHROME |
 |
 |
METRIC Radial Ball Bearings MAX
(Series M6200, M6300)
Loading slot for MAX # Balls |
 |
 |
Deep Groove Ball Bearings
INCH
STAINLESS, CERAMIC or CHROME |
 |
 |
INCH Semi-Precision Bearings
STAINLESS, CERAMIC or CHROME |
 |
 |
Thin Section Ball Bearings
(X, C and A Types)
STAINLESS, CERAMIC or CHROME |
 |
 |
Spherical Roller Thrust Bearings
STAINLESS, CERAMIC or CHROME |
 |
 |
Self-Aligning Ball Bearings
STAINLESS, CERAMIC or CHROME |
 |
 |
Cylindrical Roller Bearings (NEW)
STAINLESS, CERAMIC or CHROME |
 |
 |
Spherical Roller Bearings
STAINLESS, CERAMIC or CHROME |
 |
 |
- METRIC
STAINLESS, CERAMIC or CHROME |
 |
 |
Needle Bearings
STAINLESS, CERAMIC or CHROME |
 |
 |
Deep Groove Ball Bearings
METRIC
STAINLESS, CERAMIC or CHROME |
 |
 |
THRUST Bearings (Ball/Roller)
STAINLESS, CERAMIC or CHROME |
 |
 |
Rounded O.D. Bearings
(used for Track Rollers) |
 |
 |
Agricultural Bearings |
 |
 |
Mounted Units (Pillow Blocks)
2 Bolt, 3 Bolt, and 4 Bolt Units
|
 |
 |
Drawn Cup Needle Roller Bearings |
 |
 |
Rod Ends |
 |
 |
Aircraft Bearings |
 |
 |
Engineering Data |
 |
 |
Glossary of Bearings |
|
Rod Ends - Male Rod Ends
|
ASM-T & ASB-T Male Rod Ends High Strength - Aerospace Series,
SAE-AS81935/1 (Right Hand) & SAE-AS81935/1 (Left Hand) |
 |
 |
- Body - 4340 alloy steel (AMS-S-5000), heat treated, cadmium plated.
- Race - 17-4 PH stainless steel (AMS 5643), heat treated.
- Ball - 440 C stainless steel (AMS 5630), heat treated, hard chrome plated.
- Liner - AT3200 Bearing liner, permanently bonded to race inside diameter, qualified to SAE-AS81820.
- Temperature range: -65°F to +325°F
- No load rotational breakaway torque can be varied to meet specific application requirements.
- Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASMK-3T.
- As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
- All threads are rolled after heat treatment, and conform to UNJF-3A per AMS-S-8879.
- Rod End Bearings listed are manufactured to comform to the dimensions, materials, and configurations of SAE-AS81935/1, and are approved for procurement under this specification.
|
|
ASM & ASB Male Rod Ends High Strength - Aerospace Series, Metal to Metal |
 |
 |
- Body - 4340 alloy steel (AMS-S-5000), heat treated, cadmium plated.
- Race - 17-4 PH stainless steel (AMS 5643), heat treated.
- Ball - 440C stainless steel (AMS 5630), heat treated, hard chrome plated (AMS-QQ-C-320 Class 2).
- The metal to metal Rod End Bearings listed in the tables below have the same envelope dimensions, materials (less Ptfe Liners), basic tolerances, and load capacities as those that are approved to SAE-AS81935/1.
- Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ASMK-3.
- As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
- All threads are rolled after heat treatment, and conform to UNJF-3A per AMS-S-8879.
- Consult factory for material substitutions or dimensional modification possibilities.
- Radial Clearance is .002 max (for .0005 max, use suffix-R Example: ASMK-6R).
- Add letters "F" or "Z" to part size to designate flush or zerk type fittings respectively (Example ASM-6F or ASM-6Z).
- For dry-film lubrication on the inside diameter of races, use suffix D(Example ASMK-6D). For dry film on ball bore and/or outside diameter, contact factory.
|
|
HXAM-TM-500 & HXAB-TM-500 High Misalignment Series Male Rod Ends |
 |
 |
- Body - 4340 alloy steel (AMS-S-5000), heat treated, cadmium plated.
- Race - Alloy steel, heat treated, plated for corrosion resistance.
- Ball - 52100 steel (AMS 7440), heat treated, hard chrome plated (AMS-QQ-C-320, Class2).
- Liner - AT 3200 bearing liner, permanently bonded to race inside diameter. Qualified to SAE-AS81820.
- Units are traceable and are magnetic particle inspected after assembly.
- Rod End Bearings listed in tables below are shown with SAE-AS81820 Ptfe liners. These Rod Ends are available less the Ptfe liners. Omit "T" from the suffix in the part number. (Ex: HXAM-6M-500)
- For non-Ptfe lined units the radial clearance is .002 max. (for .0005 max use suffix R)(Ex: HXAM-6RM-500).
- For keyway designation, consult our engineering department.
- For dry-film lubrication on inside diameter of races, add suffix D (Ex: HXAM-6DM-500). For dry-film on ball bore and or ball outside diameter, consult factory.
- Consult factory for material substitutions or dimensional modification possibilities.
- Rod Ends are traceable and magnetic particle inspected. For non-traceable and non-magnetic particle inspected, contact factory.
|
|
|